 |
Barb and Tim Work on a broken stone. After the bottom part of this has had time to settle in we will place the top on it with adhesive and put splints of wood and wire to hold in in place for 30 days while the adhesive sets. |
 |
Bill and Frank add crushed stone around a reset stone. This will keep the water drained away so that when the temperature is below freezing it shouldn't move the stone again. |
 |
Bill and Nikki raise Willard Thayer's stone to place crushed stone
under and level it. When they started the stone tipped towards Bill about
25 degrres off plumb.
Williard is the only confirmed veteran in the cemetery. Word from a person that grew up in the area is that on Decoration Day when he was a kid there were several flags there. |
 |
Ths is the front right hand corner. We had to remove a large rose bush that had gone wild and was covering one of he stones. The 2 left hand stones are 3 piece. At this point they have been leveled and the first 2 parts are together. After the adhesive sets we will return and add the third piece. |
 |
Here is a closer look at one of the 3 piece stones that we will finish later. Notice the foot stones that have been reset. |